No motorcycle rider wants to drop their beloved bikes on the rough roads ut unfortunately, accidents do happen. And at the time of one, you would want your motorcycle to be safe at any cost alongside yourself.
An accident or a fall can be highly costly to a motorcycle and if the scale of the damage is big, sometimes the repairing cost may get close to the original buying cost of the motorcycle. So, all in all, you need to be cautious and prevent.
In this regard, motorcycle engine guards are truly worth it. They offer adequate protection to the engine at the time of a fall or an accident at low speed. Even at high speeds, they offer some form of protection not just to the expensive engine of your bike but also, to your precious legs. Motorcycle engine guards worth high quality protects the motorcycle engine in a high-speed crash. Shop for vehicle crash protection components for long rides.
So, let’s look at the reasons why engine guards are necessary for a motorcycle rider…
Protects the Engine of the Motorcycle
There are many reasons why you should install engine guards on your motorcycle, but the number one reason is to protect the engine.
If you fall off or have an accident, the engine guard will help to keep the engine from hitting the ground first. This can save you a lot of money in repairs, and it’s definitely worth the investment.
Whenever a bike falls, even at low speeds, it can cause some cosmetic damage to the body of the bike along with some internal damages. At the time of a fall, the engine bars act as a barrier between the engine and the ground and thereby, protect the engine from coming in direct contact with the dust and gravels of the ground.
So, more than ‘training wheels’ as they are sarcastically referred to by experienced drivers, engine guards are an additional safety barrier in your motorcycle. Always remember that even the most experienced of riders can sometimes tip their bike in the most ordinary of circumstances.
Your motorcycle gets all its power from its engine and therefore, it’s not just the most expensive but also, the most important component of your motorcycle. Any external damage to it can cause some serious internal problems and suddenly one fine morning you might find that your bike is not taking a start at all.
All these unfortunate situations that come from an accident can be simply prevented by installing engine guards on your bike. Also, you need to consider the repairing cost of an engine. Sometimes the costs are so high that they burn a big hole in the rider’s pocket.
So, to be on the safer side and keep all the unfortunate consequences at bay, do not hesitate to install engine guards on your motorcycle.
Protects the Legs of Riders at an Event of an Accident
Another great reason to install engine guards is to protect the legs of riders in case of an accident.
If you fall off or have an accident, the engine guard will help to keep your legs from hitting the ground first. This can save you a lot of pain and injury, and it’s definitely worth the investment.
At the time of a fall, the engine bars act as a barrier between the engine and the ground and thereby, protect the legs from coming in direct contact with the asphalt of the road.
So, more than just protecting your engine, engine guards also protect your legs in case of an accident. This is a very important reason why you should install engine guards on your motorcycle.
Many experienced riders have also said that when they crashed at low speeds, because of the engine guards, they have successfully managed to avoid any serious injury to their legs. Otherwise, their legs could have got crushed or been dragged along between the ground and the motorcycle.
Therefore, the pain and injuries that can come from hitting the ground during an accident can be prevented by installing engine guards on your bike. So, if you care about and your safety while riding, then don’t forget to buy engine guards for your motorcycle.
What are the benefits of installing an engine guard on a motorcycle?
The above discussion clearly depicts that buying engine guards are a one-time investment that can save you from unnecessary expenses in times of accidents or falls. Some people often ask, aren’t crash helmets enough? Well, crash helmets protect your head but not your legs, and therefore, handling an accident without them is quite challenging.
On the other hand, if you have installed engine guards on your bike then at the time of an accident they will keep both your head as well as legs safe by covering them completely. It’s always better to be prepared than sorry! No matter how rich you are, the safety, health, and security of a human being should never be compromised.
So if you care about your motorcycle, your safety, and yourself then do not hesitate to buy engine guards today!
What are the different types of motorcycle engine guards?
There are two basic types of motorcycle engine guards – Frame Sliders and Bar End Sliders. These two parts act as protection devices during any accident or fall. They work in their own unique way but together can help save you from an expensive repair bill in times of an accident.
Frame sliders slide on the frame spars of your bike while bar end sliders fit into the ends of your handlebars. The advantage of these types is that they do not take up any additional space on your bike and also do not interfere with the riding position or rider ergonomics.
Frame sliders are a bit more expensive than bar end sliders, so if you have a tight budget, go with bar end sliders. But remember that they work in only one direction, i.e., when falling to the side towards which it is installed! So make sure you install them on whichever side of your motorcycle handles the most weight while turning (usually the left-hand side). Also, make sure you get them professionally installed by a mechanic, or else driving after installing them may be dangerous for you.
So, the answer to our original question is obvious, engine guards are necessary for your motorcycle. They can save you from serious injuries which you might have otherwise suffered if you hadn’t installed them on your bike.
Installing engine guards will also make it easier for other riders to spot you when they look for other motorcycles on the road, especially during times of the night. So, now that we know how important they are, let’s hurry up and think about buying them!
And don’t forget to research through customer reviews before purchasing the best suitable engine guard for your stylish ride!
Enjoy your safe rides!