How To Strap A Motorcycle Helmet?

double d ring

While motorcycle helmets are available in multiple styles today, the double D-ring traditional fastener will never be out of fashion. Learning the art of fastening your helmet with ease and quickly is a priceless skill. Helmets are a vital part of your safety as a rider. Not only do they protect your head when you crash but properly fastened they also prevent wind noise and buffeting from compromising your ability to drive safely.

Importance of Strapping Your Helmet

No matter how punky you consider yourself, keeping the strap of your helmet loose or not strapping it can have dangerous consequences. The wind pressure on your head can cause you to lose control of your motorcycle. This is especially true when you are going at high speeds. A loosely strapped helmet can also easily fall off your head in the event of a crash.

Strapping your helmet properly is inevitable when it comes to the safety of a biker. Check your helmet strap every time you step out of the house. The process of strapping a helmet is not difficult, but it is important to do it correctly.

Types of Motorcycle Helmet Strap Buckles

Primarily there are three kinds of motorcycle helmet strap buckles:

  • Traditional D-ring Buckle
  • Quick Release Helmet Buckle
  • Micro Metric Helmet Buckle

Traditional D-ring Buckle

The Traditional D-ring buckle is the most common type of helmet buckle. It consists of two rings that are connected by a strap. The rings are placed on either side of your head and the strap goes around your neck. The straps then attach to the rings to keep the helmet in place.

The D-ring system does not comprise a hatchet system and is much less likely to fail. However, they can be difficult to operate with gloves on. On the brighter side, this type of buckle can be retrofitted to any helmet with a DD ring.

Quick Release Helmet Buckle

The Quick Release Helmet Buckle is a two-piece system that allows the rider to take the helmet off quickly. The two pieces clip together and release by pulling a tab.

The strap length of a quick-release buckle is generally adjusted using metal adjusters on either side of the buckle. Some people prefer this system for its convenience, while others say it is dangerous to use due to the risk of catching your skin in the release mechanism.

Micro Metric Helmet Buckle

The MicroMetric Helmet Buckle is a two-piece system that uses a small ratchet to tighten the strap around your head. It is adjustable and fits most helmets. It has a plastic adjuster that can be operated with just one hand to tighten or loosen the strap by turning the knob.

These are usually lighter than metal buckles and are more difficult to open accidentally. Unfortunately, they also have higher failure rates compared to other systems so you’ll need to replace them more often.

How to Strap Your Motorcycle Helmet Quickly

To get the best out of your helmet when you crash, never forget to strap it properly. The chin strap is not just a mere component of a helmet. It is the part that keeps the helmet in place in case of a crash.

On that note, let us take a look at how to strap your motorcycle helmet quickly and easily:

1. Place the helmet on your head and position it so that it fits comfortably.

2. Buckle the chin strap and adjust it so that it is tight but not uncomfortable. You should be able to fit two fingers between the strap and your chin.

3. Make sure the D-rings are facing forward and that the helmet is level on your head.

4. Reach behind your head and pull up on the D-ring closest to your ear until the strap is tight.

5. Repeat on the other side.

6. Finally, adjust the strap length so that the helmet doesn’t move when you shake your head. You may need to readjust the fit from time to time, especially if you perspire a lot.

Choosing Quick Release Strap Buckle Over D-ring

Most people avoid strapping their helmets due to the complexity. This can be solved by merely switching over to a quick release buckle. It is more advantageous to use quick-release buckles in the long term.

The strap length of a quick-release buckle is generally adjusted using metal adjusters on either side of the buckle. You can also fit it to any helmet with a D-ring system quite easily. The only downside is that it’s slightly more difficult to operate with gloves on, but this can be quickly resolved by practice.


It’s important to remember that a helmet will do you no good if it’s not strapped on properly. Just be sure to practice strapping your helmet on and off a few times before hitting the open road. It might take a little longer to do it the right way, but it’s worth it in the end. Remember, safety first!

So the next time you go out for a ride, remember to strap on your helmet properly for your safety. And don’t forget to check the chin strap every time before you leave home. It could save your life.

About The Author

daniel and sarah on motorcycle

Hi, I’m Daniel and behind me (in the photo) is my wife Sarah.

We are both travel addicts who love Motorcycles, Rock-Climbing and Camping.We love to explore everything the world has to offer

We will continue to provide even more valuable content that keeps you riding safely! Keep the rubber side down :-)

Want to Receive Exclusive Offers, Tips & Freebies

Want to know the SECRET to the perfect Motorcycle Camping Trip?


With the Ultimate Motorcycle Camping eBook, you will:


This is a one-time offer
you won't see this again.

You've got mail ✉️

You will receive your Ultimate Motorcycle Camping eBook in your inbox in the next 5 minutes

Thank you for downloading